Free Shipping on orders over $200 - Fast Shipping - Open 7 days a week

Maxx Model CNC Aluminum Hopup Chamber for M4 / M16 Series Airsoft AEG Rifles

$84.99

Quantity

Product Details

Features

  • Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability
  • Precision rotary dial design for fine hopup adjustments
  • Re-engineered the hopup levers and nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot
  • Accepted the nozzle length from 21.00mm
  • Fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
  • Equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting, 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight
  • Compatible with any 11mm inner bore AEG Gearbox/HPA Engine nozzle outlets
  • Specially designed with BB Latching System to prevent dropping BBs after removing the magazine, Manually opened to release BBs from inside hopup chamber by hand.

Model (Type): M4A - PRO

Hopup Kit Includes:

  • 1 x CNC Aluminum Hopup Chamber M4A Pro (with BB Latching System) unit
  • 2 x CNC Acrylic Side Cover
  • 2 x CNC Brass 2.5mm Side Wing
  • 1 x CNC Steel Pivot Pin
  • 1 x CNC Aluminum Hopup Lever
  • 1 x CNC Aluminum Soft Round Nub
  • 1 x CNC Aluminum Soft Flat Nub (4mm)
  • 1 x CNC Aluminum Hard Concave Nub (4mm)
  • 3 x Steel Nub Spring
  • 1 x CNC Steel Spring Guide
  • 1 x Steel Upper Compression Spring
  • 1 x Steel Center Compression Spring
  • 1 x CNC Delrin Locking C-Clip
  • 1 x CNC Brass Barrel Spacer
  • 1 x Brass Barrel Spacer Holder O-ring
  • 1 x CNC Aluminum Rotary Dial Knob
  • 1 x CNC Aluminum Inlet Adaptor (OD11mm)
  • 1 x CNC Brass Inlet Spacer

  • Overall Length: 51.65mm
    Overall Height: 37.75mm
    Inlet Adaptor Outer Diameter (to fit into Gear Box): 11mm
    Hub Outer Diameter (to fit into Outer Barrel): 12mm
    Hub Inner Diameter (to fit Nozzle): 8mm
    Feeder Outer Diameter (to fit magazine): 8.85mm
    Feeder Length (to fit magazine): 6mm
    Application: For most Tokyo Marui (include KRYTAC, except KWA) M4/M16 standard AEG version 2 gear box
    Material: Aluminum 6061

    Test Results: FPS might be increased from 10FPS to 30FPS over the stock setup. Please check your FPS!

     

    View More